Thelin Gnome Direct Vent
Gas Stove

Multiple Colors Available

Gnome™ Direct Vent Gas Stove features

  • Variable Flame Height
  • Stainless Steel Main Burner
  • Ceramic Logs – Realistic Wood Fire Effect
  • Variable speed blower
  • Sturdy cast iron construction


  • Your choice of six porcelain enamel colors
  • 14K gold plated trim package
  • Nickel plated trim package
  • Wall-mounted thermostat
  • Remote thermostat


The Gnome™ Direct Vent Gas Stove with it’s ageless elegance and fine lines is designed for small space heating and is a perfect addition to your cabin, cottage, studio, or Tiny-House. Classic “pot belly” styling hides a truly efficient gas heater core and heat exchange. Stainless steel burner with Ceramic Logs provide a realistic wood fire effect. Adding to the overall value and efficiency is a variable speed blower system heating and circulating room air. Thelin™ Gas Stoves are designed to allow for back up heat encase of a power outage. The variable gas control system uses a pilot light which does not need electricity to operate. A convenient push button igniter allows lighting ease so the pilot can be shut off when not in use. The best and brightest in the classic “Pot Belly” style!


Height: 34″
Weight: 125 lbs
Diameter: 17.5″
Venting: 6 5/8″ Simpson Duravent direct vent required
Footprint: 18.5″ square


Natural Gas Burn Rate (high): 22,000 BTU
Burn Rate (low): 13,200 BTU
AFUE Efficiency: 72.5%

Liquid Propane Burn Rate (high): 21,500 BTU
Burn Rate (low): 12,900 BTU
AFUE Efficiency: 75.9%


Back wall: 4″
Side wall: 8″
Corner wall: 8″
Alcove approved
45″ wide
27″ deep

Hearth Requirements

Floor protection is not required when installing this gas stove, but is recommended if placed on
carpet or any other soft material for the stove to
remain level. In addition, the following criteria must
be adhered to when installed:

1. Install on level and secure floor.
2. Due to high temperatures, the room heater should
be located out of traffic and away from furniture
and draperies.
3. When placed in a location where the floor-toceiling height is under 7’, the installation is
considered an alcove and must meet the
following criteria: Floor to ceiling of alcove must
be a minimum of 45”. The depth of the alcove
must be at least 27”.

Product Video